Metal Forgings from China and Korea


metal forgings FORGINGS


Manufacturing Facilities in South Korea, India & China

Click here for RFQ or to submit your drawings

FORGINGS BY PROCESS
  • Open Die Forging
  • Closed Die Forging
  • Upset Forging
  • Roll Forging
  • Draw Forging
  • Open Die Forging
    THIS PROCESS IS KNOWN AS HAND, SMITH, AND HAMMER FORGING AND APPLIED TO ALL FORGEABLE METALS, FERROUS AND NON- FERROUS.
    FORGINGS ARE MADE BY THIS PROCESS WHEN:
    1. TOO LARGE TO BE PRODUCED IN CLOSED DIES.
    2. THE MECHANICAL PROPERTIES FROM A BAR OR BILLET NEEDS IMPROVEMENT.
    3. THE QUANTITY REQUIRED IS TOO SMALL.

    SIZE: MAXIMUM 70" DIA X 75" LONG
    WEIGHT: MINIMUM 30 LBS/EA MAXIMUM 500 TONS/EA
    SHAPES: RELATIVELY SIMPLE SHAPES
    MINIMUM ORDER: 36,000 LBS
     

    Closed Die Forging
    THIS PROCESS IS THE SHAPING OF HOT METAL COMPLETELY WITHIN THE CAVITIES OF DIES AND APPLIED TO ALL FORGEABLE METALS, FERROUS AND NON-FERROUS.
    FORGINGS ARE MADE BY THIS PROCESS FOR:

    1. HIGH VOLUME
    2. TIGHT TOLERANCE
    3. COMPLEX SHAPES

    SIZE: MAXIMUM 30" WIDE X 100" LONG
    WEIGHT: MINIMUM 8 OZ MAXIMUM 20,000 LBS
    SHAPES: COMPLEX SHAPES
    MINIMUM ORDER: 36,000 LBS

    Upset Forging
    THIS PROCESS ENLARGES AND RESHAPES A CROSS-SECTIONAL AREA OF A BAR, TUBE OR OTHER PRODUCT FORM, AND APPLIED TO ALL FORGEABLE METALS, FERROUS AND NON-FERROUS.
    FORGINGS THAT ARE MADE BY THIS PROCESS INCLUDE:

    1. BOLT HEAD SHAPES
    2. SHAFT WITH FLANGE SHAPES

    SIZE: MAXIMUM 10" DIA X 30" LONG
    WEIGHT: MINIMUM 8 OZ MAXIMUM 500 LBS
    SHAPES: RELATIVELY SIMPLE SHAPES
    MINIMUM ORDER: 36,000 LBS
    Roll Forging
    THIS PROCESS REDUCES THE CROSS-SECTIONAL AREA OF BARS OF BILLETS BY PASSING THEM BETWEEN TWO DRIVEN ROLLS, AND APPLIED TO ALL FORGEABLE METALS, FERROUS AND NON-FERROUS.
    FORGINGS THAT ARE MADE BY THIS PROCESS INCLUDE:

    1. PROPELLER BLADE SHAPES
    2. TAPERED AXLE SHAFT SHAPES
    3. CONTINUOUS UNIFORM SHAPES

    SIZE: MAXIMUM 4" DIA X 250" LONG
    WEIGHT: MINIMUM 8 OZ MAXIMUM 1,000 LBS
    SHAPES: CONTINUOUS UNIFORM SHAPES
    MINIMUM ORDER: STEEL-MINIMUM 100 TONS; NON-FERROUS-MINIMUM 20 TONS

    Draw Forging
    THIS CLOSED-DIE FORGING PROCESS ALLOWS THE WORK METAL TO BE DEFORMED AT UNUSUALLY HIGH VELOCITIES AND APPLIED TO ALL FORGEABLE METALS, FERROUS AND NON-FERROUS.
    FORGINGS THAT ARE MADE BY THIS PROCESS INCLUDE:

    1. DEEP, THIN SECTIONS
    2. SEVERE DEFORMATION
    3. SYMMETRICAL SHAPES

    SIZE: MAXIMUM 45" DIA X 40" DEEP
    WEIGHT: MAXIMUM 25 LBS FOR MILD CARBON STEEL FORGINGS MAXIMUM 15 LBS FOR STAINLESS STEEL FORGINGS AND OTHER METALS
    SHAPES: SYMMETRICAL SHAPES
    MINIMUM ORDER: 36,000 LBS



    S & K Industries, Inc.    
             TOLL FREE: 1- 888- 484- 4937
             TEL:770-998-8989 -----FAX: 770-998-7486
    770 Old Roswell Place, Suite C-200 Roswell, GA 30076
    relevant links